Enigma

In this tutorial, we are going to show you how to install IPTV on an Enigma 2 based device.

Download putty from here: http://www.putty.org/

Find the IP address of the Enigma device.

Open putty:

nhybxaiydgppr.png

 

when in the Putty program fill in “Hostname” with the IP address, under the section select “Telnet”
and press open.

48y22zlf7awtv.png

 

When the black screen open, type in "root" and press enter.

9hezogdw2jjeu.png

 

and after that you're password: in mine case Dreambox (password doesn't show) and press enter

fifcgpvqntpj6.png

 

Go To reseller Portal and to the added line press the green arrow, choose Enigma 2 or 1.6 or 2.0

e14jwelhb7cf5.png

 

Copy everthing:

lk6ytda8q6rur.png

 

it should look something like this:

" Wget -O /etc/enigma2/iptv.sh”http://Geniptv-tutorial.net:8000/get.p...word=1911&type=enigma22_script&output=mpegts” && && Chmod 777 /etc/enigma2/iptv.sh /etc/enigma2/iptv.sh "

paste this in the black screen and press enter:

tcudkkrciiyqu.png

 

After that type reboot and press enter

mqrbfii6nkkot.png

 

At this time your box will restart and you can watch your channels.

Was this answer helpful?

 Print this Article

Also Read

Enigma 2 How to Convert M3U8/M3U

Please follow the below steps in order to convert to an M3U.FIRST STEP / DOWNLOAD: SPOILER:...

What is MAC address in Enigma2?

A media access control address of a device is an individual identifier attached to a network...

Enigma 2

In this tutorial, we are going to show you how to install IPTV on an Enigma 2 based...

How to setup IPTV on Formuler Z8 using MyTVOnline 2?

Turtorial: Xstream TV addon for Engima 2

!!!!!! most used and strongly suggested is using the mips32el. !!!!!!Download the plugin in from...